Bluetti EP500PRPO 5,100Wh Home Battery Backup
690900
727200
Bluetti EP500PRPO 5,100Wh Home Battery Backup
690900
727200
- 5,100Wh LiFePO4, 6000+Charge Cycle
- EP500PRO: 3000W Pure Sine Wave Output
- Movable Home Battery Backup
- In-grid UPS Mode&Flexible UPS Mode(24/7)
- Off-grid Energy Storage
- Multiple Devices Can Be Loaded Simultaneously
- Flexible Recharging Way To Keep Your EP500PRO Always On
- App Remote Control
- Smart Touchscreen
All-in-one Home Battery Backup
The BLUETTI EP500PRO is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 3000W rated pure sine wave AC inverter. This class-leading home battery backup brings you the power to run your cabin workshops, garage, or even your whole house for a day or two in the event of an unexpected outage. Up to 14 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.
2400W Unrivaled Solar Input
Time to plug into full-time solar life! BLUETTI AC300 is now capable of receiving 2,400 watts of unrivaled solar charging input. With BLUETTI’s advanced MPPT controller, you can use up to six 410W Canadian Solar panels to use only the sunshine!
Safe, Smart, And Continuously Evolving
The advanced Battery Management System and LiFePO4 chemistry bring the EP500PRO incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500PRO’s firmware can be upgraded through your internet connection. There is no best, only better!
Seamless UPS Backup
The EP500PRO will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, BLUETTI EP500PRO keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500PRO.
How to use the EP500PRO
Designed as a flexible power station to meet various scenarios, the EP500PRO has different usages. The All-in-one solution for a complete power back-up. With 5100Wh of storage and a 3000W Pure Sinewave AC power inverter, you’ll always be able to keep your household powered.
Specifications
General Information
|
EP500PRO AC Rated Power: 3000W , 3000W<load<3750W,2min , 3750W<load<4500W,5s , 4500W<load<6000W,500ms
(peak 6000W) |
|
EP500PRO Net Weight: ≈83kg (182lbs)
|
|
Dimensions: 500*300*760mm (22.8*11.8*29.9in)
|
|
Battery Capacity: 5100Wh
|
|
Battery Cell Type: LiFePO4
|
|
Rated Life Cycle: 6000+
|
|
Charge Temperature: 0°C ~ 40°C (32°F ~104°F)
|
|
Storage Ambient Temperature: 0°C ~ 45°C (32°F ~113°F)
|
|
Working Environment moisture: 10-90%
|
|
Certification: PSE, FCC, CE, UN38.3, msds, UL, SAA and ROHS
|
|
Warranty Period: 5 Years
|
Input Specs
|
EP500PRO AC Input: 3000W Max
|
|
EP500PRO PV Input: 2400W Max, 35-150VDC, 12A*2,12V/24V,8.2A
|
Output Specs
|
EP500PRO USB-C: 2*100W
|
|
EP500PRO AC: 220-240VAC*3
|
|
USB-A: 2*Quick Charging, 36W Total, 2*5VDC, 3A Total
|
|
Cigarette Lighter: 1*12VDC, 10A
|
|
RV (Aviation Port): 1*12VDC, 30A
|
|
DC 5521: 2*12VDC, 10A Total
|
|
Wireless Charging Pad: 2*5/7.5/10/15W
|
In The Box
Q1: In-Grid UPS Setup Guide
1)For non-solar-powered household circuits:An electrician with a professional technician certificate is required to install the in-grid power system, connect the wires of critical equipment from your main electrical box to the BLUETTI UPS BOX. When the power fails, it will automatically switch to EP500PRO for the power supply. The connection method: power grid--home main circuit--BLUETTI UPS box--EP500PRO--critical equipment (such as refrigerator, electric light, and server).
2)Solar-powered UPS:
1.If the open-circuit voltage of the solar panels is within the specified input range of EP500PRO, they can be directly connected into EP500PRO through the MC4 port connectors to build up the UPS system.
2.If the open-circuit voltage of your panels exceeds the input limitation of EP500PRO, they need to pass the "PV step-down module" to decrease the voltage before connecting into the system. The connection method is solar panels--PV step-down module--EP500PRO--critical equipment (such as refrigerator, electric light, and server).
Q2: Why is there a limitation on the power of the equipment loaded by the US version of EP500PRO in the mobile UPS mode?
When EP500PRO is plugged into a home wall outlet, the power output will be limited by the current of the wall plug.Q3: Can I change the working mode of EP500PRO to work as a mobile UPS after the EP500PRO connected to the home grid?
Q4: What is the UPS switching time?
There are two types of working conditions of UPS for EP500PRO.No delay for online UPS.;
20ms from standby UPS.
Q5: How much is the loss of AC and DC?
In standby state: less than 10W,AC_ON & DC_OFF: less than 20W,
AC-ON & DC_ON: less than 25W
Q6: After thestated 6000 battery cycles, how much capacity is left in EP500PRO?
EP500PRO can maintain above 50% capacity after 6000 cycles.Q7: What's thefrequency?
60Hz: US, Canada50Hz: Europe, UK, Australia
Frequency 50/60Hz cannot be switched.
Q8: What should Ido if the solar panels on the roof of my house exceed the open circuit voltagerequirement?
You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Module. Doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500PROQ9: Can I usethird party solar panel and what conditions need to be met?
Yes, you can. However, it must meet:1)Open Circuit Voltage(OCV): EP500PRO: dual MPPT，each is 35-150V/Max.12A,1200W Max. (2400W Max. For dual connection).
2)Suitable MC4 connector.
3)We recommend that the solar panels to be connected should be of the same brand.
Q10: Are there anyrestrictions on the use of the 100W USB-C port?
The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.Q11: After the DC port of 12V30A is opened, can the other DC ports be used?
No, for the 30A large-current, the other ports besides 12V/30A RV ports won`t work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle , otherwise it may cause a short circuit if the cable falls in.Q12: Note on the output power of the Split Phase BondingFunction
1) There is only one AC port marked 4000W/220-240 (or 6000W/220-240) on the Split Phase Fusion Boxes that can power the High-wattage devices. Other 6 AC ports cannot load more than 3000W on EP500PRO. 2) Under Split Phase Bonding mode, the total load power of all AC ports (on the machine and Split Phase Fusion Boxes) can not exceed 6000W for EP500PRO.Q13: If one of the EP500PRO is out of power, does the Split Phase Bonding Function continue to work?
If any one of the two EP500PRO runs out of power, the high-voltage output ports on the Split Phase Fusion Boxes will stop outputting power. The machine which still has the power needs to be set to ”Single Phase” mode manually.Q14: Does theSplit Phase Bonding Function apply to one EP500PRO?
No. Only applicable to units of the same model and specifications. For example, two EP500PRO are recommended. Besides, the Split Phase Fusion Boxes also are different.How-To Videos
A useful guide to making the most of it all.